Asus GigaX2048 - Manual (Page 135)

GigaX Series L2 Managed Switch User Guide
CLI command: security dot1x bridge reauthtime time (1-4294967295 sec)>
[Authentication Method]
Allows user to set up the authentication method (RADIUS or Local database).
CLI command: security dot1x bridge authmeth 2:radius)>
[Quiet Period]
Allows user to set up the quiet period.
CLI command: security dot1x bridge quietperiod (1-65535 sec)>
[Retransmission Time]
Allows user to set up the retransmission time.
CLI command: security dot1x bridge retxtime (1-65535 sec)>
[Max Reauthentication Attempts]
Allows user to set up the max number of the reauthentication attemps.
CLI command: security dot1x bridge reauthmax reauthentication attemps (1-10)>
[Multi-host]
Allows user to enable or disable Multi-host on some specific ports.
CLI command: security dot1x port multihost list/*>
[Authentication Control]
Allows user to set up the authentication control of some specific ports.
CLI command: security dot1x port authctrl 2:force_unauthorized 3: auto)>
[Guest VLAN]