Asus GigaX2048 - Manual (Page 68)

GigaX Series L2 Managed Switch User’s Guide
68
Figure 42. VACM View
4.6.6 USM User
USM (User-based Security Model) User is used to configure the
information of SNMPV3 USM User.
Engine Id: enter the Engine Id that should match the ID in the
Manager.
Name: enter Name combined with Engine ID that should match the
Name and Engine ID in the Manager.
Auth Protocol: enter the Auth Protocol that Engine ID and Name
belong. Only NoAuth, MD5, SHA1 can be chosen. If the NoAuth is
chosen, there is no need to enter password.
Auth Password: enter the password that the Auth Protocol belongs.
The password needs at least 8 characters or digits.