Retrieve, Show multicast group, Set multicast group – Asus GigaX2048 User Manual
Page 116: Remove multicast group
GigaX Series L2 Managed Switch User’s Guide
116
CLI command: l2 mirror egress
CLI command: l2 mirror remove
[Retrieve]
Restores the previous saved settings from configuration file.
CLI command: l2 mirror retrieve
[Show Multicast Group]
Displays the static multicast groups that are presented in the multicast
group table.
CLI command: l2 mcast show
[Set Multicast Group]
Allows user to add or modify a static multicast group by specifying the MAC
address, VLAN ID, Class of Service, VLAN port members, and its
untagged port members. Note that MAC address and VLAN ID
combination is formed as an unique entry in multicast group table.
CLI command: l2 mcast set
mac address [format: xx:xx:xx:xx:xx:xx]:
vlan id [1 by default]:
cos [0-7, 0 by default]:
port list [format: 1 2 3 4-50/* for all ports]:
untagged port list [format: 1 2 3 4-50/* for all ports]:
port list>
[Remove Multicast Group]
Allows user to delete a static multicast group entry from multicast group
table by given a MAC address and VLAN ID.