Asus GigaX2048 - Manual (Page 130)

GigaX Series L2 Managed Switch User’s Guide
130
5.3.5 Filters Commands
[New]
Creates a new filter set by specifying a unique ACL ID and its description
name.
CLI command: filter set new
[Remove]
User can delete a filter set by indicating the ACL ID.
CLI command: filter set delete
[Edit]
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Add]
User can add a new MAC address rule associated to a filter set. These filter
rule works with ICMP, TCP or UDP protocols with the action of permit or deny.
User can also specify the MAC address (source or destination) of the filter rule
by using CLI command dstmac and srcmac.
CLI command: filter rule new ICMP/TCP/UDP/any>
CLI command: filter rule dstmac address])>
CLI command: filter rule srcmac address])>