Asus RS320Q-E7/RS12 - Manual (Page 83)

5-19 ASUS RS320Q-E7/RS12
5.5.9 USB Configuration
The North Bridge is built in the CPU.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
USB Configuration
USB Devices
1 Mouse, 2 Hubs
Legacy USB Support [Enabled]
EHCI Hand-off [Disabled]
USB hardware delays and time-out:
USB transfer time-out [20 sec]
Device reset time-out [20 sec]
Device power-up delay [Auto]
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
5.5.8 Intel TXT(LT) Configuration
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Advanced
Enables or Disables Intel(R)
TXT(LT) support.
Intel Trusted Execution Technology Configuration
Intel TXT support only can be enabled/disabled if
SMX is enabled. VT and VT-d support must also be
enabled prior to TXT.
Secure Mode Extensions (SMX) Enabled
Intel TXT(LT) Support [Disabled]
Intel TXT(LT) Support [Disabled]
Allows you to enable or disable support for Intel Trusted Execution Technology (TXTLT).
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows the
system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
EHCI Hand-off [Disabled]
Enables or disables the BIOS EHCI hand-off support.
Configuration options: [Disabled] [Enabled]