Asus RS320Q-E7/RS12 - Manual (Page 108)

6-14 Chapter 6: RAID configuration
Using the Objects command
To initialize the virtual drives using the Objects command
1. From the Management Menu, select Objects > Virtual Drive, and then press
.
2. Select the virtual drive to initialize from the Virtual Drives sub-menu, and then press
.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Change VD Parameters
Objects
Adapter
Virtual Drive
Physical Drive
LSI Software RAID Configuration Utility Ver C.05 Feb 17, 2012
BIOS Version A.10.09231523R
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management
Configure
Initialize
Objects
Rebuild
Check Consistency
Select VD
Objects
Adapter
Virtual Drive
Physical Drive
Virtual Drive(1)
Virtual Drive 0
LSI Software RAID Configuration Utility Ver C.05 Feb 17, 2012
BIOS Version A.10.09231523R
Press ENTER To Select A VD, To Delete A VD