Asus RS320Q-E7/RS12 User Manual
Page 134
7-6
Chapter 7: Driver installation
4.
Insert the RAID driver disk you created earlier to the USB floppy disk drive, then press
5.
Select the RAID controller driver you need from the list, then press
6.
The Windows
®
Setup loads the RAID controller drivers from the RAID driver disk. When
prompted, press
7.
Setup then proceeds with the OS installation. Follow screen instructions to continue.
To an existing Windows
®
Server OS
To install the RAID controller driver on an existing Windows
®
Server OS
1.
Restart the computer, and then log in with Administrator privileges.
2.
Windows
®
automatically detects the RAID controller and displays a New Hardware
Found window. Click Cancel.
3.
Right-click the My Computer icon on the Windows
®
desktop, and then select
Properties from the menu.
4.
Click the Hardware tab, and then click the Device Manager button to display the list of
devices installed in the system.
5.
Right-click the RAID controller item, then select Properties.
6.
Click the Driver tab, and then click the Update Driver button.
7.
The Upgrade Device Driver Wizard window appears. Click Next.
8.
Insert the RAID driver disk you created earlier to the USB floppy disk drive.
9.
Select the option Install the software automatically (Recommended), and then click
Next.
10. The wizard searches the RAID controller drivers. When found, click Next to install the
drivers.
11. Click Finish after the driver installation is done.
ENTER=Continue ESC=Cancel F3=Exit
Windows Setup
Please insert the disk labelled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.