Asus RS320Q-E7/RS12 - Manual (Page 35)

2-15 ASUS RS320Q-E7/RS12
2.6 Cable connections
• The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you will remove pre-installed components to install
additional devices.
• Refer to Chapter 4 for detailed information on the connectors.
P8BH
Pre-connected system cables
1. 20-pin proprietary power connector (from connection board to motherboard)
2. System fan connectors (FRNT_FAN1, FRNT_FAN2, FRNT_FAN3 and FRNT_FAN4)
3. Panel connector (from motherboard to connection board)
4. SATA connectors (from motherboard to SATAII/SAS connection board)
5. Auxiliary panel connector (from motherboard to connection board)
1
2
1
3 5
2 2
4