Asus RS320Q-E7/RS12 - Manual (Page 124)

6-30 Chapter 6: RAID configuration
6.3.4 Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a
RAID volume hard disk drive deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID and press .
The following screen appears.
2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then
press to select.
3. Press to reset the RAID set drive(s). A confirmation message appears.
4. Press to reset the drive(s) or press to return to the utility main menu.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model Serial # Size Status
0 ST3160812AS 9LS0HJA4 149.0GB Member Disk
1 ST3160812AS 9LS0F4HL 149.0GB Member Disk
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[ RESET RAID DATA ]