Asus RS120-E4/PA4 - Manual (Page 110)

6-4 Chapter 6: RAID Configuration
6.2 LSI Logic Embedded SATA RAID Setup
Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0
or RAID 1 set(s) from SATA hard disk drives connected to the SATA connectors
supported by the motherboard Southbridge chip.
You may also create a RAID set(s) in a Windows ® operating environment using
the Global Array Manager (GAM) application. Refer to the GAM user guide in
the motherboard support CD for details.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility
automatically detects the installed SATA hard disk drives and displays any
existing RAID set(s). Press + to enter the utility.
The LSI Logic Embedded SATA RAID automatically configures a RAID 1
(Mirrored) set when the SATA is configured as RAID in the BIOS and you
installed two hard disk drives without a RAID configuration.
LSI Logic Embedded SATA RAID BIOS Version 5.5.03031654R
(C)2004 Copyright LSI Logic Corporation. ALL Rights Reserved.
LSI Logic Embedded SATA RAID Found at PCI Bus No:00 Dev No:1F
Scaning for Port0 ... Responding. HDS722512VLSA80 117800MB UDMA5
Scaning for Port1 ... Responding. HDS722512VLSA80 117800MB UDMA5
01 Logical drive(s) Configured.
Array# Mode Stripe Size No.Of Stripes DriveSize Status
00 Reliability 64KB(128 Sectors) 02 1143376MB Online
Press Ctrl-M to run LSI Logic Embeded SATA RAID Setup Utility.