Asus ESC2000 G2 - Manual (Page 93)

ASUS ESC2000 G2 4-17
Intel Virtualization Technology [Enabled]
When this item is enabled, VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
Configuration options: [Disabled] [Enabled]
Local APIC Mode [Auto]
Allows you to enable one or both the Advanced Programmable Interrupt Controllers (APIC)
with APIC ID values greater than 254.
Configuration options: [Auto] [xAPIC] []x2APIC]
Enable the power
management features
CPU Power Management Confguration
Power Technology [Custom]
Enhanced Intel SpeedStep Technolog [Enabled]
Turbo Mode [Enabled]
P-STATE Coordination [HW_ALL]
CPU C3 Report [Disabled]
CPU C6 Report [Enabled]
CPU C7 Report [Disabled]
Package C State limit [C6]
Energy Performance [Balanced Performance]
Factory long duration power limit 95 Watts
Long Duration Power Limit 0
Factory long duration maintained 1000 ms
Long Duration Maintained 0
Recommended short duration power1 1.2 * Long Duration
Short Duration Power Limit 0
4.5.2 CPU Power Management Configuration
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Power Technology [Custom]
This item allows you to enable power management features.
Configuration options: [Disable] [Energy Efficient] [Custom]
You can only customize the items below when you enable the Power Technology to
[Custom].
Enhanced Intel SpeedStep Technology [Enabled]
Enable Intel SpeedStep for allowing the system operation system to dynamically
adjust processor voltage and cores frequency to result in decreased average power
consumption and decreased average heat production.
Configuration options: [Disabled] [Enabled]