1 change smbios event log settings, Change smbios event log settings -45, Smbios event log [enabled – Asus ESC2000 G2 User Manual
Page 121: Erase event log [no, When log is full [do nothing, Log system boot event [disabled, Meci [1, Metw [60
ASUS ESC2000 G2
4-45
4.7.1
Change Smbios Event Log Settings
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Event Logs
Change this to enable or
disable all features of
Smbios Event Logging during
boot.
Enabling/Disabling Options
Smbios Event Log
[Enabled]
Erasing Settings
Erase Event Log
[No]
When Log is Full
[Do Nothing]
Smbios Event Log Standard Settings
Log System Boot Event
[Disabled]
MECI
1
METW
60
Custom Option
Log OEM Codes
[Enabled]
Convert OEM Codes
[Disabled]
Note: All values changed here do not take effect
until computer is restarted.
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enabling/Disabling Options
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
Erasing Settings
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging
activation during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
This item allows you to choose options for reactions to a full Smbios Event Log.
Configuration options: [Do Nothing] [Erase Immediately]
Smbios Event Log Standard Settings
Log System Boot Event [Disabled]
This item allows you to choose options to enable/disable logging of System boot event.
Configuration options: [Enabled] [Disabled]
MECI [1]
This item allows you to set Mutiple Event Count Increment (MECI). The number of
occurrences of a duplicate event that must pass before the multiplt-event counter
associated with the log entry is updated, specified as a numeric value in the range 1 to
255.
METW [60]
This item allows you to set Mutiple Event Time Windows (METW). The number of
minutes which must pass between duplicate log entries which utilize a multiple-event
counter. The value ranges from 0 to 99 minutes.