1 system event log, System event log -42, Sel components [disabled – Asus ESC2000 G2 User Manual
Page 118: Erase sel [no, When sel is full [do nothing
4-42
Chapter 4: BIOS setup
4.6.1
System Event Log
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Server Mgmt
Change this to enable or
disable all features of
system Event Logging during
boot.
Enabling/Disabling Options
SEL Components
[Disabled]
Erasing Settings
Erase SEL
[No]
When SEL is Full
[Do Nothing]
Note: All values changed here do not take effect
until computer is restarted.
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
SEL Components [Disabled]
Allows you to enable or disable all features of system Event Logging during boot.
Configuration options: [Disabled] [Enabled]
Erase SEL [No]
Allows to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
•
The following items appears only when you set SEL Components to [Enabled].
•
All values changed here do not take effect until computer is restarted.