Asus ESC2000 G2 - Manual (Page 108)

4-32 Chapter 4: BIOS setup
Enable/Disable USB 2.0 (EHCI)
Support.
EHCI Controller 1 [Enabled]
EHCI Controller 2 [Enabled]
USB Port 1 [Enabled]
USB Port 2 [Enabled]
USB Port 3 [Enabled]
USB Port 4 [Enabled]
USB Port 5 [Enabled]
USB Port 6 [Enabled]
USB Port 7 [Enabled]
USB Port 8 [Enabled]
USB Port 9 [Enabled]
USB Port 10 [Enabled]
USB Port 11 [Enabled]
USB Port 12 [Enabled]
USB Port 13 [Enabled]
USB Port 14 [Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
USB Ports Configuration
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
EHCI Controller 1/2 [Enabled]
This item allows you to enable or disable USB 2.0 (EHCI) Support. If we disable the
EHCI Controller in BIOS > South Bridge > USB configuration, the USB device will all
disable in OS.
Configuration options: [Disabled] [Enabled]
USB Port 1/14 [Enabled]
These items allow you to enable or disable USB ports 1 to 14.
Configuration options: [Disabled] [Enabled]
4.5.8 ACPI Settings
Enables or Disables BIOS ACPI
Auto Configuration.
ACPI Settings
Enable ACPI Auto Configuration [Disabled]
Enable Hibernation [Enabled]
ACPI Sleep State [S3 (Suspend to RAM)]
Lock Legacy Resources [Disabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced