Asus ESC2000 G2 - Manual (Page 170)

5-40 Chapter 5: RAID configuration
8. When you are finished, you will see the following screen in Volumes field and you can
change related items in the Volume Properties field.
5.4.2 Change Volume Type
When you are finished to create a RAID set, you can view or change related items in the
Volume Properties field.
To change the type in Volume Properties:
1.
Click the SAS array items you want to change in Volumes field.
2 From the Volume Properties field, select Type:RAID 1 Change type.
3. You can change the Name, Select the new volume type, and Select additional disks
to include in the new volume if needed.
4. Then select the Data stripe size for the RAID array (for RAID 0, 10 and 5 only),
and then click OK. The available stripe size values range from 4 KB to 128 KB. The
following are typical values:
RAID 0: 128KB
RAID 10: 64KB
RAID 5: 64KB