beautypg.com

4 removing and reinstalling the backplane, Removing and reinstalling the backplane -18 – Asus ESC2000 G2 User Manual

Page 38

background image

Chapter 2: Hardware setup

2-18

2.7.4

Removing and reinstalling the backplane

DO NOT remove the backplane unless necessary!

1.

Remove all hot-swap HDD trays from the

chassis.

2.

Disconnect all cables from the SATA

backplane.

3.

Loosen the four screws on the

backplane.

6.

Push the tray lever until it clicks, and

secures the drive tray in place. The drive

tray is correctly placed when its front

edge aligns with the bay edge.

7.

Repeat steps 1 to 6 if you wish to install

a second SATA drive.

4.

Firmly hold the backplane, lift it up and

remove it from the module.

5.

Follow the previous instructions in

reverse to reinstall the backplane.

See also other documents in the category Asus Computer hardware: