Asus ESC2000 G2 - Manual (Page 159)

ASUS ESC2000 G2 5-29
5.3.4 Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID. Resetting a
RAID volume hard disk drive deletes all internal RAID structure on the drive.
To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID and press .
The following screen appears.
2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset, and then
press to select.
3. Press to reset the RAID set drive(s). A confirmation message appears.
4. Press to reset the drive(s) or press to return to the utility main menu.
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model Serial # Size Status
0 ST3300656SS HWAS0000991753TR 279.3GB Member Disk
1 ST3300656SS 37VN00009846RAJ1 279.3GB Member Disk
Select the disks that should be reset.
[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
[ RESET RAID DATA ]
5.3.5 Exiting the Intel ® Rapid Storage Technology utility
To exit the utility:
1.
From the utility main menu, select 4. Exit, and then press . The following
warning message appears.
2. Press to exit or press to return to the utility main menu.
Are you sure you want to exit? (Y/N):
[ CONFIRM EXIT ]