Asus ESC2000 G2 - Manual (Page 140)

5-10 Chapter 5: RAID configuration
Using New Configuration
When a RAID set already exists, using the New Configuration command erases the
existing RAID configuration data. If you do not want to delete the existing RAID set, use the
View/Add Configuration command to view or create another RAID configuration.
To create a RAID set using the New Configuration option:
1. From the Management Menu, select Configure > New Configuration, and then press
.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver C.05 Apr 5, 2012
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2. Follow step 2 to 9 of the previous section: Using Easy Configuration.
3. Select Size from the Virtual Drive menu, and then press .
4. Key-in the desired virtual drive size, and then press .
5. Follow step 10 to 14 of the previous section: Using Easy Configuration to create the
RAID set.
Management
Configure
Initialize
Objects
Rebuild
Check Consistency
LSI Software RAID Configuration Utility Ver C.05 Apr 5, 2012
BIOS Version A.10.09231523R
D N L I N
D N L I N
E a s y C o n f i g u r a t i o n - A R R A Y
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
V i r t u a l
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size:
Enter VD Size: 152146_
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option