Asus ESC2000 G2 - Manual (Page 167)

ASUS ESC2000 G2 5-37
5.4 Intel ® Rapid Storage Technology
enterprise Utility (Windows)
The Intel ® Rapid Storage Technology enterprise utility allows you to create RAID 0, RAID 1,
RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected
to the Serial ATA connectors supported by the Southbridge.
Before you using Intel
® Rapid Storage Technology enterprise utility, you need to change BIOS
setting first:
1.
Enter the BIOS Setup during POST.
2. Go to the Advanced Menu > Chipset Configuration > PCH Configuration>
Onboard SATA Oprom, then press .
3. Set Onboard SATA Oprom to [Enabled].
4. Press to save your changes and exit the BIOS Setup.
You can click Rescan to re-scan any attached hard disks.
1. Turn on the system to Windows desktop.
2. Click the Intel ® Rapid Storage Technology enterprise icon to display the main menu.
To enter the Intel ® Rapid Storage Technology enterprise utility under Windows operating
system:
You need to manually install the Intel ® Rapid Storage Technology enterprise utility on a
Windows ® operating system. Please refer to the installation instructions in Chapter 6.
Your storage system is configured for data protection, increased performance and
optimal data storage capacity. You can further optimize your storage system by creating
additional volumes.