Asus ESC2000 G2 - Manual (Page 181)

ASUS ESC2000 G2 6-7
5. When asked if you will load additional RAID controller drivers, select No, then press
.
More Driver Disks?
Do you wish to load any more
driver disks?
Yes No
6. Follow the onscreen instructions to finish the OS installation.
7. When the installation is completed, DO NOT click Reboot. Press + +
to switch to the command-line interface from graphic user interface.
8. Type the following commands when using a Legacy floppy.
mkdir /mnt/driver
mount /dev/fd0 /mnt/driver
cd /mnt/driver
sh replace_ahci.sh
reboot
For Red Hat ® Enterprise Linux OS 6.1
To install the LSI MegaRAID controller driver when installing Red Hat ® Enterprise OS:
1. Boot the system from the Red Hat ® OS installation CD.
2. Press to edit options.