GE Industrial Solutions KW010-015-020-025 (Sixteenth-Brick) - Manual

Data Sheet
October 7, 2013
KW010/015/020/025 (Sixteenth-Brick) Power Modules:
36
–75Vdc Input; 1.2Vdc to 5.0Vdc Output;10A to 25A Output Current
* UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment should be followed
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-045 ver. 1.09
PDF name: kw010-015-020-025_ds.pdf
Features
 Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
 Compliant to RoHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
 Delivers up to 25A output current
5V(10A), 3.3V(15A), 2.5V(20A), 1.8V-1.2V(25A)
 High efficiency – 91% at 3.3V full load
 Small size and low profile:
33.0 mm x 22.9 mm x 8.5 mm
(1.30 in x 0.9 in x 0.335 in)
 Industry standard DOSA footprint
 -20% to +10% output voltage adjustment trim
 Remote On/Off
 Remote Sense
 No reverse current during output shutdown
 Over temperature protection (latching)
 Output overcurrent/overvoltage protection
(latching)
 Wide operating temperature range (-40°C to 85°C)
 Meets the voltage isolation requirements for
ETSI 300-132-2 and complies with and is licensed
for Basic Insulation rating per EN60950-1
 UL* 60950-1Recognized, CSA
†
C22.2 No.
60950-1-03 Certified, and VDE
‡
0805 (IEC60950
3
rd
Edition) Licensed
 CE mark meets 2006/95/EC directive
§
 ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
 Distributed power architectures
 Wireless networks
 Access and optical network Equipment
 Enterprise Networks
 Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Options
 Negative Remote On/Off logic
 Surface Mount (Tape and Reel, -SR Suffix)
 Over current/Over temperature/Over voltage
protections (auto-restart)
 Shorter lead trim
Description
The KW (Sixteenth-brick) series power modules are isolated dc-dc converters that operate over a wide input voltage
range of 36 to 75Vdc and provide a single precisely regulated output. The output is fully isolated from the input,
allowing versatile polarity configurations and grounding connections. The modules exhibit high efficiency, typical
efficiency of 91% for 3.3V/15A. These open frame modules are available either in surface-mount (-SR) or in
through-hole (TH) form.
RoHS Compliant
Representative Photo, actual product may vary.