GE Industrial Solutions IEMi - Manual (Page 9)

Module load screen (when available)
Total kVA
The load level in kVA (for RPA Parallel System: only this unit).
Percentage
The load level as a percentage of the nominal rated load
(for RPA Parallel System: only this unit).
The source of the power supplied to the load:
- Detour ON (Q2 close) - Load on inverter - Q1 open
` Home\Meter
MODULE LOAD
Total kVA 120 kVA
Percentage 40%
LOAD ON INVERTER
- Load on bypass - Load Off - On battery
- Inverter OFF (IEMi)
` Home\Meter
COUNTERS
Bypass utility failure : 25
Rectifier utility failure : 14
Overloads : 15
Statistics screen
The total number of minor utility/mains faults (bypass
utility/mains out of tolerance faults).
The total number of times a gap of utility/mains in the
rectifier has been recorded.
The total number of detected output overloads.
The total operating time for the Inverter (in hours).
The total operating time for the UPS (in hours).
InvOperTime [h] : 2135
UPSOperTime [h] : 3125
IEMi OperTime [h] : 1379
The total operating time for the UPS in IEMi Operation Mode
(in hours) – this counter is displayed only when IEMi
Operation Mode is available (option).
Modifications reserved Page 9/24
OPM_OPT_IEM_iXX_XXX_XGB_V010.doc User Manual IEMi - Intelligent Energy Management integrated