GE Industrial Solutions IEMi - Manual (Page 24)

6.2 CUSTOMER INTERFACE IM0171
X1 terminals – Output signals on voltage free contacts
X1 / 1, 2, 3 NO, C, NC Mains Failure (def. Parameter RL=1)
X1 / 4, 5, 6 NO, C, NC Load on Inverter (def. Parameter RL=3)
X1 / 7, 8, 9 NO, C, NC Stop Operation (def. Parameter RL=5)
X1 / 12, 13, 14 NO, C, NC Load on Mains (def. Parameter RL=2)
X1 / 15, 16, 17 NO, C, NC General Alarm (def. Parameter RL=4)
X1 / 18, 19, 20 (def. Parameter RL=6) NO, C, NC Acoustic Alarm
The programmable signals on X1 will be disabled with Q1 open,
with the exception of the signals for “16 - Manual Bypass ON”
and “26 - EPO”.
Input contacts
X1 / 10, 21 NO Programmable
12
8 19
21
22
20
10
11
9
17
18
16
15
7
6
5
4
12
14
13
3
2
1
X1
X2
J1
SGSE
_600_
S1_
Cus
to
m
er
int
erfa
ce_0
1
X1 / 11, 22 NO Programmable / Generator ON
Fig. 7.2-1 Customer Interface IM0171
On terminals X1 connector, the output signals can be associated to a specific function.
This selection can be performed from the display by QUALIFIED AND TRAINED PERSONNEL (password
required).
With reference to IEMi Operation Mode, the following function is available:
27- eBoost/IEMi mode.
This signal indicates when IEMi Operation Mode is enabled and active.
Some UPS functions can be activated when an external Normally Open contact is closed on:
X1-10, 21 or X1-11, 22
The specific function can be selected from the display by QUALIFIED AND TRAINED PERSONNEL
(password required).
With reference to IEMi Operation Mode, the following function is available:
8 – eBoost/IEMi control.
When active, this function will deactivate IEMi Operation Mode.
6.3 3-PH SNMP/WEB ADAPTER
IEMi Operation Mode can be enabled, disabled and programmed via the web interface of a 3-ph
SNMP/Web adapter when this option is available in the Parallel System.
The configuration selection mirrors the parameters described in this manual.
For further details, refer to the product documentation of the 3-ph SNMP/Web adapter option.
Modifications reserved Page 24/24
OPM_OPT_IEM_iXX_XXX_XGB_V010.doc User Manual IEMi - Intelligent Energy Management integrated