GE Industrial Solutions Austin MicroLynx II 12V SIP - Manual

Data Sheet
January 18, 2010
Austin MicroLynx II TM 12V SIP Non-isolated Power Modules:
8.3Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 6A Output Current
UL is a registered trademark of Underwriters Laboratories, Inc.
†
CSA is a registered trademark of Canadian Standards Association.
‡
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-025 ver. 1.33
PDF name: microlynx_II_12v_sip_ds.pdf
*
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Flexible output voltage sequencing
EZ-SEQUENCE TM
ƒ Delivers up to 6A output current
ƒ High efficiency – 89% at 5.0V full load (V
IN
=
12.0V)
ƒ Small size and low profile:
25.4 mm x 12.7 mm x 6.68 mm
(1.00 in x 0.5 in x 0.263 in)
ƒ Low output ripple and noise
ƒ High Reliability:
Calculated MTBF = 15.3M hours at 25 o C Full-load
ƒ Constant switching frequency (300 KHz)
ƒ Programmable Output voltage
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL * 60950-1Recognized, CSA † C22.2 No.
60950-1-03 Certified, and VDE ‡ 0805:2001-12
(EN60950-1) Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Description
Austin MicroLynx II TM 12V SIP power modules are non-isolated dc-dc converters that can deliver up to 6A of output
current with full load efficiency of 89% at 5.0V output. These modules provide precisely regulated output voltage
programmable via external resistor from 0.75Vdc to 5.5Vdc over a wide range of input voltage (V
IN
= 8.3 - 14V).
The Austin MicroLynx II TM 12V series has a sequencing feature, EZ-SEQUENCE TM that enable designers to
implement various types of output voltage sequencing when powering multiple voltages on a board. Their open-
frame construction and small footprint enable designers to develop cost- and space-efficient solutions.
RoHS Compliant
EZ-SEQUENCE TM