2 adding users – GE Industrial Solutions Entellisys 5.0 Administrator Manual User Manual
Page 15
HMI User configuration
15
4
4.1.2 Adding Users
Add users under the appropriate group at each HMI. (Administrative user rights are required)
Each individual that is expected to operate the system should be given their own account. There
are three default users.
Guest: The guest login allows read-only access to all status and settings screens. The
system defaults to guest level access as soon as someone logs out.
Operator with RELT: Individuals that require access to control breakers, acknowledge
alarms, modify breaker settings and can operate RELT. (See
Operator: Individuals that require access to control breakers, acknowledge alarms,
modify breaker settings but can not operate RELT.
Administrator: Operator permissions plus access can backup and restore settings,
change CPUs, create users and other administrative tasks.
Changing user permissions
Permissions may be changed on a user basis for all users added to new user groups. Operator
and Administrator user permissions are fixed and can not be changed.
Figure 4-3 User Administration screen in the HMI
Adding new users
1. On the Main Menu, click the User Administration button (Visible only by an Entellisys
Administrator)
2. Click the user group which the user will be added and click “Add User”
3. Update the contact information
4. In the Authentication box, Enter their login ID and password
5. Modify permissions if required (must create a new user group)
6. The changes are immediately saved in the HMI