SENA PS210W - Manual (Page 98)

98
Appendix 5. Using Pro Series with Serial/IP
A 5.1. Pro Series vs. Serial/IP options
Table A-4 Pro Series vs. Serial/IP option compatibility matrix table
Serial Port Configuration of Pro Series Serial/IP Configuration
Host mode Configuration
Cryptography
Configuration
Host mode Telnet Protocol SSL
Credentials
Connection
Protocol
Security
TCP Disabled None
No login
required
Raw TCP
connection
Disable
TCP Enabled None
No login
required
Telnet Disable
TCP Disabled Enabled
No login
required
Raw TCP
connection
SSLv3 or
TLSv1/SSLv3
only
TCP Enabled Enabled
No login
required
Telnet
SSLv3 or
TLSv1/SSLv3
only
Please note that Pro Series support only the SSLv3 encryption method, so user should select one of
“SSLv3 or TSLv1” option or “SSLv3 only” option in Serial/IP.
A 5.2. Connection example - Telnet and SSLv3 encryption
Step 1. Set host mode of serial port #1 of Pro Series as follows,
Host mode = TCP,
Port numer = 7001,
Telnet protocol = Enabled