SENA PS210W User Manual
Page 17
17
System console:
Local users can connect directly to the system console port of the Pro Series using the serial
console cable.
Remote console:
Remote users who require a menu-driven interface can utilize Telnet (port 23) or SSH (port 22)
connections to the Pro Series using Telnet or SSH client.
Note : Please note that Pro Series supports only the SSH v2, so user must use the SSH client which
is able to support SSH v2.
Web:
Remote users who want to use a web browser to configure the Pro Series can connect to the Pro
Series using a conventional web browser, such as Internet Explorer or Netscape Navigator.
The above methods require user authentication by the Pro Series system.
2.2.5. Using the System console
1)
Connect one end of the console cable to the console port on the Pro Series.
Figure 2-6 Connecting a system console cable to the PS x10W
2)
Connect the other end of the cable to the serial port of the user’s computer.
3)
Run a terminal emulator program (i.e. HyperTerminal). Set the serial configuration
parameters of the terminal emulation program as follows:
9600 Baud rate
Data bits 8