SENA PS210W - Manual (Page 20)

20
2.3. Accessing the Web Browser Management Interface
The Pro Series supports both HTTP and HTTPS (HTTP over SSL) protocols. The Pro Series also
contains its own Web management utility. To access the Pro Series Web management utility, enter
the IP address or resolvable hostname of the Pro Series into the web browser’s URL/Location field.
This will direct the user to the Pro Series login screen. The user must authenticate themselves by
logging into they system with a correct user name and password. The factory default settings are:
Login: root Password: root
Note : Before accessing the Pro Series Web management page, the user must check the IP address
(or resolvable Hostname) of the Pro Series and Subnet mask settings.
Figure 2-9 Login screen of the Pro Series web management
Figure 2-10 shows the configuration homepage of the Pro Series Web management interface. A menu
bar is provided on the left side of the screen. The menu bar includes the uppermost configuration
menu groups. Selecting an item on the menu bar opens a tree view of all the submenus available
under each grouping. Selecting a submenu item will allow the user to modify parameter settings for
that item. Every page will allow the user to [Save], [Save & apply] or [Cancel] their actions. After
changing the configuration parameter values, the users must select [Save] to save the changed
parameter values to the non-volatile memory. To apply all changes made, the user must select
[Apply Changes]. This option is available on the bottom of the menu bar. Only when the user selects
[Apply changes] will the new parameter values be applied to the Pro Series configuration. The user
also can select [Save & apply] to save parameters and apply changes in one step.
If the user does not want to save the new parameter values, the user must opt to [Cancel]. All changes
made will be lost and the previous values restored. But the changes that are already saved or applied
cannot be canceled.