SENA PS210W - Manual (Page 28)

28
Figure 3-6 WiFi Status
3.2.6. Adhoc configuration
This menu is enabled when the Network type is Adhoc mode. In order to use Adhoc mode, the device
to which the PSx10W and the PSx10W should share channel number, security configuration (Auth-
Encryption) and key. (When DHCP server is not running, you must use Static IP.)
Figure 3-7 Adhoc configuration
 Country
Select country that is used now.
 Channel
Select a channel for Adhoc connection
 Network ID (SSID)
The SSID of the device to which the PSx10w connect
 Auth-Encryption
The security configuration of the device to which the PSx10w connect
 Key
The key of the device to which the PSx10w connect