SENA PS210W - Manual (Page 75)

75
Figure 5-11 Transfer binary file by Zmodem (TeraTerm Pro)
_] Firmware upgrade [_________________________________________________________
Do you want to upgrade firmware? [yes/no] yes
Transfer firmware by zmodem using your terminal application.
To escape, press Ctrl+X
**B0ff000005b157
**B0ff000005b157
**B0ff000005b157
**B0ff000005b157
Firmware upgrade failed !
Now reboot ...
Figure 5-12 Firmware upgrade failure message
5.9. User administration
User can enable port authentication (see section 4.2.3.1. TCP mode), then user should enter correct
user ID and password of each port when he tries to access the serial port.
The user ID and password for each serial port can be set using this menu. When user adds a new
user for serial port, he can also assign permissible serial ports to the user selectively, as shown on
Figure 5-13 Port user administration.