SENA PS210W - Manual (Page 66)

66
serial port directly on Port event handling configuration. This will enable the user to monitor the data
from the attached device or to manage/control a device attached serial port directly when pre-defined
keywords are detected. Also , the status of the connection between the Pro Series and the serial
device and the status of the TCP connection between the Pro Series and remote hosts could be
monitored and managed as well.
Each reaction can be configured individually upon each event. Reaction can be an email delivery,
SNMP trap sending, command sending or either combination of all reactions.
 Port event handling
If the user wants to enable port event handling feature, set Port event handling as enable. This is
a global parameter so if this feature is disabled, the Pro Series does not take any actions on port
events.
 Notification interval
To prevent Pro Series from being trapped in handling port event, there is a Notification interval
parameter. Pro Series will send notification email or SNMP trap every Notification interval even it
detects predefined keyword within Notification interval. The smaller value of this parameter will
result in immediate response for predefined keyword and heavy usage of system resources. The
largest value accepted by user is recommended to prevent system resource usage minimization.
Note : The port command in keyword response is not affected by this parameter. Port command
will be sent immediately when the corresponding keyword is detected.
 Email notification
This parameter enables or disables Email notification feature of the Pro Series. When Pro Series
sends Email notification, it uses the SMTP server configured in SMTP server configuration. If the
SMTP server is not configured correctly or disabled, Email feature will be disabled. For details of
SMTP server configurations and descriptions, please refer to section 3.5 SMTP Configuration.
 Subject of Email
This parameter set the subject of Email that will be sent by Pro Series when pre-defined keyword
is detected.
 Recipient’s Email address
This parameter set mail recipient who will receive notification mail when pre-defined keyword is
detected.
 SNMP trap notification
This parameter enables or disables SNMP trap notification feature of Pro Series.