C.6 rs232 mode – SENA Parani-MSP100 User Manual

Page 60

frame called ‘In-Band Command’. Inserted frame will be processed by Parani-MSP100 and not be

transferred to destination device.

**INI+DST,,,… **

where, dstX means Bluetooth address of destination.

ex)

**INI+DST,00:0B:53:10:00:8A**Hello**INI+DST,00:0B:53:10:00:8B,00:0B:53:10:00:8C**Bluetooth

For example, if you send preceding frame to Parani-SD, 00:0B:53:10:00:8A device will receive ‘Hello’

and the other devices will get ‘Bluetooth’as below figure.

All Parani-SD should be connected to Parani-MSP100.

As Serial Hub mode does not need TCP/IP network connectiv ity, users do not need to configure

network settings. Only power-supply needed.

C.6 RS232 mode

Multi-drop

If users set Parani-MSP100 to RS232 mode, Parani-MSP100 may act as 1:N multi-serial port by its

RS232 port. In RS232 mode, Parani-MSP100 will send data to external serial port, not via Ethernet

network.

00:0B:53:10:00:8A

00:0B:53:10:00:8B

00:0B:53:10:00:8C

“Bluetooth”

“Hello”