SENA Parani-MSP100 - Manual (Page 26)

26
i) Set the serial configuration of Parani-MSP100
As RS232 port has been configured to be used as a Configuration port, which allows users to
access the configuration utility of the Parani-MSP100. When the Parani-MSP100 is set to
RS232 Mode, users will need to change the Switch on the left side of Parani-MSP100 to the
Data position to allow for proper data communication to occur.
- Login the console of Parani-MSP100 (Default: 115200-N-8-1-Flowcontrol None)
- Select menu #4. Serial Port (RS232)
- Set the serial parameters like below.
Parani-MSP Configuration Console ----
-- Press Enter ---
login: admin
Password: *****
Parani-MSP100 Version v1.0.0 -----------------------------
Copyright (C) 2006 Sena Technologies, Inc.
-----------------------------------------------
SN : MSP060900003
Bluetooth
dev0 - 00:01:95:20:04:51
Network [dhcp]
IPaddr 192.168.222.16 HWaddr 00:01:95:00:00:32
Netmask 255.255.0.0 Gateway 192.168.1.1
DNS1 168.126.63.1 DNS2 168. 126.63.2
LAP profile : [disabled]
--- Main Menu ---
1. Network Settings
2. LAP
3. Firmware Download
4. Serial Port (RS232)