SENA Parani-MSP100 - Manual (Page 13)

13
(15) Networking configuration is complete. The preceding example shows static IP
assignment to Parani-MSP100. The user should select static, DHCP or PPPoE IP as
needed.
3.2. LAN Access Profile
Parani-MSP100 supports LAN Access Profile for Bluetooth networking Access Point. By direct
connection of Parani-MSP100 to ADSL, the internet is accessible via Bluetooth.
Select menu 2. LAP by entering ‘2’; Parani-MSP100 prompts for LAP profile enable/disable. Select
‘Y’[Yes] to enable or ‘N’[No] to disable LAP profile.
3.3. Firmware Download
Parani-MSP100 enables users to upgrade the firmware. The SENA customer support team offers
available firmware upgrades via Xmodem or TFTP user download; menu no. 3. Firmware Download.
During Firmware download, STATUS and ERROR LEDs flash. DO NOT TURN OFF Parani-
MSP100 during firmware download.
Turning off Parani-MSP100 during firmware download may
result in operation malfunction.
There are two methods of firmware upgrade: 1. Xmodem
2. TFTP.
3.3.1 Firmware Upgrade via TFTP
•
Users may upgrade the firmware using TFTP via Crossed cable.
3. Firmware Download → 2.TFTP