2 data transmission, 1 command mode, Data transmission – SENA ProBee-ZS10 User Manual

Page 56: Command mode

ProBee-ZS10 User Guide Rev.1.5

00019500002FDC15

Response

AT+REMOTE=1FEF,AT+LONGADDR

# get 64-bit address of remote node (1FEF)

00019500002FDC15

Response

AT+DSCAN

# get the information of other nodes in the network

# (Response from Node with PTv1.2 or earlier)

ZC |00019500002FDC40|0000|PTv1.0|ZE10|ZE10_COM3

ZR |00019500002FDC15|1FEF|PTv1.0|ZE10|ZE10_COM4

CLD0|00019500002FDC17

CLD1|00019500002FDC14

ZED*|00019500002FDC17|7E34|PTv1.0|ZS10|ZS10_COM5

SED

|00019500002FDC14|F5AC|PTv1.0|ZU10|ZU10_COM6

Response

cf:

AT+DSCAN

# get the information of other nodes in the network

# (Response from Node with PTv1.3 or later)

ZC*

|00019500002FDC40|0000|PTv1.3|ZE10|ZE10_COM3

ZR |00019500002FDC15|1FEF|PTv1.3|ZE10|ZE10_COM4

CLD0|7E34

CLD1|F5AC

ZED

|00019500002FDC17|7E34|PTv1.3|ZS10|ZS10_COM5

SED

|00019500002FDC14|F5AC|PTv1.3|ZU10|ZU10_COM6

Response

6.2 Data

Transmission

6.2.1 Command

Mode

# send unicast message(MSG01) to specific node using 64-bit long
address(0x00019500002FDC15)

AT+UNICAST=00019500002FDC15,MSG01

Response

# send unicast message(MSG02) to specific node using 16-bit short
address(0x1FEF)

AT+UNICAST=1FEF,MSG02

Response

# send multicast message(MSG03) to specific group(0001)

AT+MULTICAST=0001,MSG03