SENA ProBee-ZS10 - Manual (Page 52)

52 ProBee-ZS10 User Guide Rev.1.5
Execute AT+LINKKEY? AT+LINKKEY=
Response
OK
OK or ERROR
Default FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
5.8.3 AT+NWKKEY or AT+NK
Description
Get/Set the 128-bit network key. (possible to set only for coordinator, 0 or 0s: generate
random 128-bit number)
Execute AT+NWKKEY? AT+NWKKEY=
Response
OK
OK or ERROR
Default FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
5.8.4 AT+UPDATEKEY or AT+UK
Description
Update the network key with a new generated key. (possible only for coordinator) It is
applied after 30s later because sending too quickly may cause a sleepy end-device to
miss the alternate encryption key and only get the switch key message, which means it
will be unable to change to the new network key.
Execute AT+UPDATEKEY
Response OK
or ERROR
5.9 UART
5.9.1 AT+BAUDRATE or AT+UB
Description
Get/Set the serial port speed for communication between the module serial port and
host.
Execute AT+BAUDRATE? AT+BAUDRATE=
Response
OK
OK or ERROR
Default 9600
Range
300 - 230400
5.9.2 AT+DATABIT or AT+UD
Description Get/Set the serial data bit setting on the module.
Execute AT+DATABIT? AT+DATABIT=
Response
OK
OK or ERROR
Default 8
Range
7 - 8