SENA ProBee-ZS10 - Manual (Page 43)

43 ProBee-ZS10 User Guide Rev.1.5
5.2.4 ATE
Description Echo(1) or No Echo(0).
Execute ATE
Response OK
5.2.5 ATM
Description
Enter the multicast mode. If there’s no argument after the command, it will connect to
the preconfigured destination group ID(AT+DESTGROUPID). Every data is packetized
at intervals of inter character timeout(S12).
Execute ATM ATM
Response OK
5.2.6 ATO
Description Return to data mode.
Execute ATO
Response
5.2.7 ATR
Description Response(1) or No Response(0).
Execute ATR
Response OK
5.2.8 ATS
Description Get/Set the S-registers.
Execute ATS ATS? ATS=
Response
List of the S-register and
description
OK
OK or ERROR
5.2.9 ATZ
Description Reset the node.
Execute ATZ
Response OK
5.2.10 AT&F
Description Factory reset.
Execute AT&F
Response OK