Ocean Optics DTS - Manual (Page 34)

Chapter 4
4-10 Polychromix DTS TM Near-Infrared Spectrometer
Operator’s Manual
Document Number 04-91-0201-00 Rev A
If the user now performs a transmittance scan, that scan will be placed in
register 0 and can be moved with the key to register 2 (Figure 4-13).
Figure 4-13: The Plot Legend Dialog Box after Collecting a Transmittance Scan
and moving it.
The color of the traffic light in the PlotLegend dialog box indicates the display
status of the register.
Red - The contents of the register are not displayed.
Yellow – The contents of the register can be displayed if the appropriate
spectral type is active (e.g. a reflectance scan cannot be displayed if the
absorbance mode is active, but could be displayed if the active mode was
changed to reflectance).
Green - The contents of the register are displayed.
To change the display state:
•
To display a register that is not currently displayed, click on the traffic light
until it turns green.
•
To turn off a register that is currently displayed, click on the traffic light
until it turns red.
The highlighted scan in the Plot Legend dialog box (which is indicated with a
gray background) can be renamed as desired by typing in the desired name.