Ocean Optics DTS - Manual (Page 33)

The SpectralCode Application Program
Polychromix DTS TM Near-Infrared Spectrometer 4-9
Operator’s Manual
Document Number 04-91-0201-00 Rev A
After a spectrum is collected, the PlotLegend dialog box will be updated as
shown in Figure 4-10. The green traffic light indicates that the spectrum is
displayed (the color of the traffic light in the PlotLegend window indicates the
status of the register as described below) and the B in the right box indicates
that the scan is a Background scan. The final box indicates the color of the
spectrum; if desired, you can change the color by clicking on the box.
Figure 4-10: The Plot Legend Dialog Box after a Background Scan
To move the background scan to register 1, press the key to present
the RegOverwrite dialog box (Figure 4-11) and press OK. If a register(s) is
occupied, the display will list all of the occupied register(s) and the lowest
unoccupied register. The user may select any register to overwrite by clicking
on it. By default, the next unoccupied register is initially selected.
Figure 4-11: The RegOverwrite Dialog Box
The dialog box will appear as shown in Figure 4-12. The red circle for register
0 indicates that the register is not displayed.
Figure 4-12: The Plot Legend Dialog Box after Moving the Background Scan