Ocean Optics PlasCalc - Manual (Page 4)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 1
1 Safety Instructions
Instructions: All the safety and operating instructions should be read before the unit is
operated. Before using the power supply for the first time check for transport damage.
Warning: All warnings on the unit and in the operating instructions should be
adhered to.
Use this instrument in a clean laboratory environment.
Moisture
The unit is designed for operation in dry rooms only.
Heat
The unit should be situated away from radiators, hot bodies, ovens or other heat
sources.
Power Sources
The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the unit.
Object and Liquid Entry
Care should be taken that objects do not fall, or liquids spilled into the enclosure
through openings.
2 Unpacking Instructions
Your package should contain:
1x
PlasCalc-2000-UV-VIS-NIR
1x Power supply 12VDC
1x USB connection cable
1x Software CD
1x This manual
1 Unpack your PlasCalc-2000 carefully. Dropping this instrument can cause permanent
damage.
2 Inspect the outside of the instrument and make sure that there is no damage to your
unit. In case of damage contact the dealer immediately and DO NOT USE THE
INSTRUMENT!