Ocean Optics PlasCalc - Manual (Page 20)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 17
7.4.6 Tools Menu
Spectrometer | Select spectrometer
Opens the dialog for selecting a spectrometer. In this dialog the Serialnumber of the PlasCalc system has to
be selected
Spectrometer | Configure spectrometer
Opens a dialog to view and change calibration parameters of the spectrometer.
Control devices | Select control device
Select if the PlasCalc-2000 control device or a demo driver is used
Multi channel systems | Configure monitor
Only for multi channel systems like the ProCess-2000
SpecLine | Open spectrum
Opens the specLine software and shows the selected spectrum
SpecLine | Configure
Set the installation path of the SpecLine software
All SpecLine related functions are only functional if SpecLine is installed on the PC.