Ocean Optics PlasCalc - Manual (Page 18)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 15
Dark spectrum | Open dark spectrum from file
Load existing dark spectrum from disk
Dark spectrum | Save dark spectrum to file
Save the dark spectrum to disk.
Dark spectrum | Clear dark spectrum
Clear the background spectrum. All signal values are set to zero.
7.4.4 Monitoring Menu
New monitor
Create a new monitor file.
Start monitoring
Start monitoring.
If the option Synchronize recording with monitoring is selected in the dialog Monitor Options
recording spectra will start as well.
Pause monitoring
Pause monitoring.
While pausing monitoring recording spectra will continue. Monitoring time is suspended until
pausing is turned off.
Stop monitoring
Stop monitoring.
If the option Synchronize recording with monitoring is selected in the dialog Monitor Options
recording will stop as well.
Suspend monitor display
Suspend monitor display while recording data.
Since updating the display consumes a lot of CPU time this option may be helpful for
measurements in which time is critical.
Configure monitoring
Open the dialog for setting up and changing the recording options.
Fix plot at minimum x
Fixes the monitor plot at actual x value