Ocean Optics PlasCalc - Manual (Page 14)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 11
7.4.2
Edit Menu
XY-Autoscale
Set the display ranges of the wavelength/time and of the signal to the minimum and maximum data
values of the selected file.
This will display all data of the selected file.
X-Autoscale
Set the display range of the wavelength/time to the minimum and maximum data values of the
selected file.
The display range of the signal remains unaffected.
Y-Autoscale
Set the display range of the signal to the minimum and maximum data values within the displayed
wavelength/time range of the selected file.
The display range of the wavelength/time remains unaffected.
XY-Autoscale single track
Set the display ranges of the wavelength/time and of the signal to the minimum and maximum data
values of the selected spectrum/track.
This will display all data of the selected track.
X-Autoscale single track
Set the display range of the wavelength/time to the minimum and maximum data values of the
selected spectrum/track.
The display range of the signal remains unaffected.
Y-Autoscale single track
Set the display range of the signal to the minimum and maximum data values within the displayed
wavelength/time range of the selected spectrum/track.
The display range of the wavelength/time remains unaffected.
Add line
Add a line to the selected spectrum.
This line may be used for monitoring the time dependency of the intensity.
Add integral
Add a line integral to the selected spectrum.
This line integral may be used for monitoring the time dependency of the intensity.