Ocean Optics PlasCalc - Manual (Page 23)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 20
7.5 Tool Bars
In the tool bars the most important and often used menu commands are displayed
as buttons. By pressing a button the corresponding menu command is carried out.
7.5.1 File Tool Bar
Button Action
Create a new record or monitor window
Open an existing spectrum or PlasCalc File (.pcf)
Save the data of the active window in ASCII format
Close the active window with all spectra and/or PCF files
Display the index of the help system
Print the active window
7.5.2 View Tool Bar
Button Action
Switch on/off zooming
Switch on/off line cursor
Switch on/off horizontal scrollbar
Switch on/off vertical scrollbar
7.5.3 Edit Tool Bar
Button Action
Open dialog for setting up and changing plot options
Autoscale display ranges for x and y of the selected file
Autoscale display range for x of the selected file
Autoscale display range for y of the selected file
Autoscale display ranges for x and y of the selected track
Autoscale display range for x of the selected track
Autoscale display range for y of the selected track
Add a line to the selected spectrum
Add a line integral to the selected spectrum
Delete selected line or line integral