Ocean Optics PlasCalc - Manual (Page 36)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 33
Options
Allow real-time autoscaling
for y-values Automatic autoscaling of the y-values while
monitoring. The autoscaling can be
switched on and off with the commands Y-
Autoscale and Y-Autoscale single track.
Synchronize recording with
monitoring Synchronize Start/Stop of recording spectra
with Start/Stop of monitoring
Pause monitoring while
average signal... Automatic pausing while monitoring for
overall light signals less than the given
value
Display data values Display current intensity value while
monitoring
Reporting of set-point
crossing Action when falling below or exceeding set-
point
General:
Default values: The current options are saved as default
values