Ocean Optics PlasCalc - Manual (Page 13)

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology 10
7.4 Menu Commands
7.4.1
File Menu
New ... <
Create one of the following configurations as new:
New record
New monitor
Open ...
Open a spectrum or an existing PlasCalc File (.pcf).
Save
Save the data of the active window in ASCII format. You will be asked which spectra or time tracks
you want to save.
Close
Close the active window with all spectra and/or PlasCalc Files.
Print...
Print the active window. For the setting up the printer please refer to the options section in the
printer set-up.
Start options ...
Open the dialog for changing the start options.
Operation mode <
< < <
Select the operation mode and configure the user mode
Administrator mode
User mode
User setting
Changing between administrator and user mode requires a password. The default password is
"admin".
If you don't remember your password copy the default administration file "admin" from the
installation CD in the program folder.
Exit
Close the application Ocean Optics PlasCalc stopping all recording processes.