Ocean Optics PlasCalc User Manual

Page 17

Ocean Optics Germany GmbH PlasCalc 2000 Thin Film Metrology

Reference spectrum | Subtract reference spectrum

Switch on/off automatic subtraction of reference spectrum while recording.

Reference spectrum | Take current spectrum as reference spectrum

Set current spectrum as reference spectrum.

Reference spectrum | Open reference spectrum from file

Load a reference spectrum from hard disk.

Reference spectrum | Save reference spectrum to file

If the saving option is selected in the dialog Record Options and default file name for the
reference spectrum is specified, the current spectrum will also be saved to hard disk using the
default file name.

Reference spectrum | Clear reference spectrum

Clear the reference spectrum. All signal values are set to zero.

Intensity calibration | Apply intensity calibration

Activate / deactivate intensity calibration

Intensity calibration | Take current spectrum as calibration spectrum

Set current spectrum as calibration spectrum.

Intensity calibration | Open calibration spectrum from file

Load an existing calibration spectrum from disk

Intensity calibration | Save calibration spectrum to file

Save the calibration spectrum do disk

Intensity calibration | Clear calibration spectrum

Clear the calibration spectrum. All values are set to zero.

Dark spectrum | Subtract dark spectrum

Switch on/off automatic subtraction of background spectrum while recording.

Dark spectrum | Take current spectrum as dark spectrum

Set current spectrum as background spectrum.
If the saving option is selected in the dialog Record Options and default file name for the
background spectrum is specified, the current spectrum will also be saved to hard disk using the
default file name.