Powersolve SM800 Series - Manual (Page 3)

SM800
May 2013 SPECIFICATIONS Page 1 - 3
Re lay Out puts
ACF
DCF AC - Fail both NO and NC con tact
DC - Fail 1 ) both NO and NC con tact 1 ) out put volt age ± 5% be yond set point
Sta tus out puts
CC - sta tus
LIM- sta tus
OT
- sta tus
PSOL - sta tus
ACF - sta tus
DCF - sta tus
CC - op er a tion 5 V = logic 1 (R
o
= 500 Ohm)
CV- or CC-limit 5 V = logic 1 (R
o
= 500 Ohm)
Over Tem per a ture 5 V = logic 1 (R
o
= 500 Ohm)
Power Sink Over load 5 V = logic 1 (R
o
= 500 Ohm)
AC - Fail 5 V = logic 1 (R
o
= 500 Ohm)
DC - Fail 2 ) 5 V = logic 1 (R
o
= 500 Ohm) 2 ) out put volt age ± 5% be yond set point
Re mote Shut Down with + 5V, 1 mA or re lay con tact
In ter lock con tact at rear panel, see photo of rear panel on page 1-6
In di ca tors (front panel) Volt age me ter, Am pere me ter, AC-Fail, DC-Fail, Over Tem per a ture, Power Sink Over load,
Re mote-Shut Down, Re mote-CV, Re mote-CC, Out put On, CV-limit, CC-limit, CV- and CC- mode
Con trols (front panel) Mains on/off switch, CV-and CC-potmeter, CV- and CC-limit-potmeter, Dis play-Set tings but ton,
Dis play-Lim its but ton, Re mote/Lo cal but ton, Out put On/Off but ton, Front panel Lock but tons.
Pro gram ming speed
Stan dard Ver sion
SM 7.5-80 SM 18-50 SM 70 - AR - 24 SM 400 - AR - 4
Rise time (10 - 90%)
out put volt age step
time, (100 % load)
time, (10 % load)
out put volt age step
time, (100 % load)
time, (10 % load)
0 → 7.5 V
6.5 ms
2.5 ms
-
-
-
0 → 16 V
12 ms
5 ms
-
-
-
0 → 35 V
6 ms
2.5 ms
0 → 70 V
10 ms
7 ms
0 → 200 V
4 ms
2 ms
0 → 400 V
8 ms
5 ms
Fall time (90 - 10%)
out put volt age step
time, (100 % load)
time, (10 % load)
out put volt age step
time, (100 % load)
time, (10 % load)
7.5 → 0 V
6.5 ms
62 ms
-
-
-
16 → 0 V
12 ms
120 ms
-
-
-
35 → 0 V
6 ms
60 ms
70 → 0 V
25 ms
250 ms
200 → 0 V
4 ms
42 ms
400 → 0 V
15 ms
155 ms
Pro gram ming speed
High speed Ver sion
SM 7.5-80
Op tion P250
SM 18-50
Op tion P251
SM 70 - AR - 24
Op tion P252
SM 400 - AR - 4
Op tion P253
Rise time (10 - 90%)
out put volt age step
time, (100 % load)
time, (10 % load)
out put volt age step
time, (100 % load)
time, (10 % load)
0 → 7.5 V
0.2 ms
0.2 ms
-
-
-
0 → 16 V
0.22 ms
0.26 ms
-
-
-
0 → 35 V
0.24 ms
0.24 ms
0 → 70 V
0.24 ms
0.24 ms
0 → 200 V
0.4 ms
0.3 ms
0 → 400 V
0.82 ms
0.55 ms
Fall time (90 - 10%)
out put volt age step
time, (100 % load)
time, (10 % load)
out put volt age step
time, (100 % load)
time, (10 % load)
Rip ple @full load
(rms/pp)
@full load
(rms/pp)
Out put ca pac i tance
7.5 → 0 V
0.2 ms
1 ms
-
-
-
20 / 80 mV
310 µF
16 → 0 V
0.24 ms
1.95 ms
-
-
-
40 / 120 mV
200 µF
35 → 0 V
0.27 ms
3 ms
70 → 0 V
0.85 ms
9.5 ms
35 V / 24 A
25 / 90 mV
70 V / 12 A
30 / 110 mV
80 µF
200 → 0 V
0.42 ms
4.6 ms
400 → 0 V
1.7 ms
20 ms
200 V / 4 A
35 / 200 mV
400 V / 2 A
30 / 160 mV
4 µF
Notes: All spec i fi ca tions re gard ing pro gram ming speed are typ i cal and mea sured on a re sis tive load.
SM 7.5-80 SM 18-50 SM 70-AR-24 SM 400 - AR - 4
Re cov ery time
re cov ery within
di/dt of load step
out put volt age
time, @ 50 - 100% load step
max. de vi a tion
@ 230 V AC in put volt age 50 mV
1.25 A/µs
7 V
100 µs
160 mV
60 mV
0.9 A/µs
15 V
100 µs
150 mV
35 V / 70 V
75 mV
0.4 / 0.2 A/µs
30 / 65 V
100 µs
250 / 200 mV
200 V / 400 V
1 / 0.5 V
0.1 / 0.05 A/µs
185 / 370 V
100 µs
2 / 1.5 V
Out put im ped ance
CV, 0-1 kHz
CV, 1-100 kHz < 1 mΩ
< 30 mΩ
< 2 mΩ
< 30 mΩ
< 7 mΩ
< 35 mΩ
< 0.18 Ω
< 2 Ω
Pul sat ing load
max. tol er a ble AC com po nent
of load cur rent
f > 1 kHz
f < 1 kHz
15 Arms
80 Apeak
15 Arms
50 Apeak
10 Arms
12 / 24 Apeak
0.4 Arms
2 / 4 Apeak