Powersolve ES150 Series - Manual (Page 5)

ES150
Rev. Sept. 2012 SPECIFICATIONS Page 1 - 5
Typical Applications
• Test and measurement • Component device testing
• Controlled battery charging • ATE in industrial production lines • Medical research equipment
• Electronic Circuit Development • Laboratory analysis • Accurate current sources
Available Options
In creased Out put Power
The conservatively rated unit
allows to deliver extra output with
the same reliability. At some
derating, either the maximum
output voltage or the maximum output current can
be increased by about 10%.
• Order Code - P069
High Volt age Iso la tion
A higher output isolation
allows series operation
up to 1000V.
• Order Code - P089
Se cured Volt age
and Cur rent Set ting
For a maximum security, the
CV/CC settings can be
adjusted with a
screwdriver only and are protected with a
plastic cap from accidental adjusting.
• Order Code - P001
Se quencer
Arbitrary Waveform generator
or standalone automation.
The sequencer is integrated
in the Ethernet controller.
•
Order Code - P150
Rear Power Out put
and Re mote Sensing
Output terminals at the rear
panel instead of bind posts
at the front panel, includes
remote sensing.
• Order Code - P119 - 122
Soft ware con trol
and In ter faces
Factory installed programming
interfaces:
• RS232 controller - P148
• Ethernet contr. (incl. sequencer) - P150
• PROFIBUS controller - P279
• CANBUS controller - P280
External programming interface modules :
• IEEE488 controller module
• ISO AMP module
19" Rack
Mount ing Adapter
Using the 19" mounting
adapters, it is possible to
position the ES units in a
19" rack. Several configurations possible
with multiple ES and / or PSC or ISO AMP
modules.