R&M Materials Handling VARIABLE SPEED CONTROLS ControlMaster Select Service Manual - Manual (Page 8)

R&M Materials Handling, Inc.
4501 Gateway Boulevard
Springfield, Ohio 45502
P.: (937) 328-5100
FAX: (937) 325-5319
8/46
R&M Materials Handling, Inc. reserves the right to alter or amend the above information without notice.
2.6.2 EP2-control
c_coep2a
A. Pushbutton / controller position
B. Speed
0) “decelerate to zero”
1) while starting “drive minimum speed”
while running “hold speed”
2) while running “accelerate”
while running at maximum speed “hold speed”
2.6.3 EP3-control
c_coep3a
A. Pushbutton / controller position
B. Speed
0) “decelerate to zero”
1) step 1 “drive minimum speed”
2) step 2 “hold speed”
3) step 3 while running “accelerate”
while running at maximum speed “hold speed”
2.6.4 MS4-control
c_coms4b
A. Controller position
B. Speed
0) “decelerate to zero”
1) step 1 “drive minimum speed”
2) step 2 “drive speed2”
3) step 3 “drive speed3”
4) step 4 “drive maximum speed”